Planet Technology BT-420U - Manual (Page 11)

Bluetooth USB Adapter User Guide
10. Please click Yes to restart your computer.
2.2 Software Un-installation
1. In Windows, go to Start
→Settings→ Control Panel→ Add or Remove Programs.
2. Select “PLANET Bluetooth Software” and click the “Remove” button.
2.3 Hardware Installation
Note: The hardware installation should be only performed after the software is
well installed.
Precaution
Before the installation, make sure the USB port exists in your computer and is enabled.
To check this, go to My Computer
ÆControl Panel ÆSystem. Open the Device
Manager tab. If the Universal Serial Bus controller device is found, it means your
USB port is installed and enabled. If not, either no USB port is installed or the USB
bios is not properly enabled. In this case, consult your computer dealer for USB sup-
port.
6