Planet Technology BT-420U - Manual (Page 24)

Bluetooth services require a Bluetooth application on the remote device; services and
applications usually have coinciding names; i.e., there is a Bluetooth Fax Service and
a Bluetooth Fax Application.
The services supported by Bluetooth are:
‧ Bluetooth Imaging—allows a remote device to send images (BMP, GIF, PNG, &
JPG) to this computer. Images are stored in the Bluetooth Exchange Folder.
‧ Bluetooth Serial Port—a wireless connection between two devices. This con-
nection can be used by applications as though a physical serial cable connected
the devices.
‧ Dial-up Networking—allows a device to use a modem that is physically attached
to another Bluetooth device.
‧ Fax—allows a device to send a fax using a remote Bluetooth cell phone, mo-
dem, or computer.
‧ File Transfer—allows a device to perform file system operations on another
Bluetooth device; browse, open, copy, etc.
‧ Headset—allows a Bluetooth headset to be used as the audio input/output
mechanism for another Bluetooth device, such as a computer or cell phone.
‧ PIM Item Transfer—allows two Bluetooth devices to exchange Personal Infor-
mation Manager data such as business cards, calendar items, email messages,
and notes.
‧ PIM Synchronization—allows two Bluetooth devices to synchronize Personal
Information Manager data.
‧ Network Access—allows a device to access a Local Area Network via a second
Bluetooth device that is physically connected to the network or allows a remote de-
vice to become part of an ad hoc network provided by the Bluetooth server.
‧ Audio Gateway—allows the microphone/speakers on a Bluetooth device (typi-
cally a computer) to be used as the audio input/output mechanism for a remote
Bluetooth device, such as a cell phone.
All Bluetooth servers do not necessarily provide all of these services. For example,
network gateways may provide only the Network Access service.
5.3 Bluetooth Connection Status
The Bluetooth Connection Status dialog box displays information about the state of a
connection and provides a means to disconnect an active connection.
Display the Connection Status dialog box: in My Bluetooth Places, from the Fold-
ers pane, select a device, and then, in the right pane of My Bluetooth Places, right-
click a service name and select Status from the shortcut menu.
The Information provided is:
‧ Status: “Connected” or “Not Connected”
‧ Device Name: the name of the device to which this computer is connected.
‧ Duration: the length of time that this connection has been established, dis-
played in hours, minutes and seconds. Depending on the service, the connection
may time out (automatically disconnect) after a specific period of inactivity.
‧ Activity: the number of bytes sent and received over the connection.
‧ Signal Strength: a graphic indicator that ranges from Too Weak through Good
to Too Strong.
NOTE: To change the power transmission level of this computer: from the Bluetooth
Configuration Panel, Hardware tab, click the Advanced button, and then change the
setting in the Maximum Power Transmission drop-down list. The Advanced button is
not available in all countries.
The controls in the Bluetooth Connection Status dialog box are
19