Planet Technology BT-420U - Manual (Page 8)

2
Chapter 2
Installation
2.1 Software Installation
Note: The Bluetooth Software should be installed well prior to the hardware installa-
tion. If the hardware install to PC before software installed, Windows will install this
Bluetooth device with its built-in driver. That will make the Bluetooth device work
incorrect.
1. Insert the CD-ROM into the CD-ROM drive to initiate the autorun program. Once
completed, a menu screen will appear.
2. To install the Bluetooth software, click on the "Bluetooth Software" hyperlink to
activate the installation procedure for the application program.
If the autorun program is not executed, you can start the installation as follows.
• Click on Start Menu/ Run.
• Enter “D:\Utility\setup.exe” in the appeared box, where “D” is the letter of your
CD-ROM drive.
• Click on “OK” button.
3. On the Welcome screen, click the Next button.
4. When the License Agreement screen is displayed, read the License Agreement,
then select “I accept the terms in the license agreement” and click the Next but-
ton.
3