Pioneer VSX-LX52 - Manual (Page 15)

Connecting your equipment 03
15
En
7 Audio/video source inputs/(outputs) (x5)
Use for connection to audio/visual sources, such as DVD
players/recorders, VCRs, etc. Each set of inputs has jacks
for composite video, S-Video and stereo analog audio.
 See Connecting an HDD/DVD recorder, VCR and other
video sources on page 27.
8 Stereo analog audio source inputs/(outputs) (x3)
Use for connection to audio sources such as CD players,
tape decks, turntables, etc.
 See Connecting other audio components on page 28.
9 Multichannel analog audio inputs
7.1 channel inputs for connection to a DVD player with
multichannel analog outputs.
 See Connecting the multichannel analog inputs on
page 28.
10 Multichannel pre-amplifier outputs
Use to connect separate amplifiers for front, center,
surround, surround back and subwoofer channels.
 See Connecting additional amplifiers on page 29 (see
also Installing your speaker system on page 19 for
powered subwoofer connection).
11 AM and FM antenna terminals
Use to connect indoor or outdoor antennas for radio
broadcasts.
 See Connecting AM/FM antennas on page 30.
12 RS-232C connector
Use for connection to a PC for graphical output when
using Advanced MCACC.
 See Connecting a PC for Advanced MCACC output on
page 34.
13 Control input/output
Use to connect other Pioneer components so that you
can control all your equipment from a single IR remote
sensor.
 See Operating other Pioneer components with this
unit’s sensor on page 33.
14 Remote inputs/output
Use for connection to an external remote control sensor
for use in a MULTI-ZONE setup, for example.
 See Connecting an IR receiver on page 33.
15 12 V trigger jacks (total 50 mA max.) (x2)
Use to switch components in your system on and off
according to the input function of the receiver.
 See Switching components on and off using the 12
volt trigger on page 34.
16 Speaker terminals
Use for connection to the main front, center, surround
and surround back speakers.
 See Connecting the speakers on page 18.
17 AC power inlet
Connect the supplied power cord here.
 See Plugging in the receiver on page 37.
VSX-LX52_SVYXJ.book 15 ページ ２００９年２月２６日 木曜日 午後４時３１分