Panasonic DMP-B200 - Manual (Page 21)

P
layb
ack
VQT3C15
21
Using this unit with other
equipment
It is possible to enjoy the high quality video and audio of this
unit on the large screen by connecting this unit with the TV
using a single cable.
≥ Turn off all equipment before connecting and read the
appropriate operating instructions.
≥ Linked operation is possible by connecting to a
Panasonic TV (VIERA) or amplifier that is compatible
with the VIERA Link (HDMI) function. (
> 22)
Preparation
Connect the devices to the unit.
You can enjoy the high quality surround audio in Dolby Digital
Plus and Dolby TrueHD by connecting this unit to the HDMI
compatible multi-channel amplifier. (
> 30) (Only when
connected to an amplifier compatible with each audio)
1
Turn on the power of the connected device
(TV, etc.), and switch the input.
Example: Set the input to “HDMI” or similar (the name of
input may be different depending on the connected device).
2
Start playback on this unit.
Video and audio are output from the connected device.
Notice
≥ To turn off the display of this unit, select “Off” for the “Monitor”
in the “LCD Menu”. ( > 13)
≥ The quality of video will lower on the screen of this unit when
HDMI is connected, but it is not a malfunction.
≥ If you raise the volume on the television while playing this
unit, the volume may abruptly become very loud when you
switch to a television broadcast. Return the volume to its
normal level before changing.
≥ Non-HDMI-compliant cables cannot be utilized.
≥ Please use High Speed HDMI Cables that have the
HDMI logo (as shown on the cover). It is
recommended that you use Panasonic’s HDMI cable.
When outputting 1080p signal (
> 28, “HDMI
Resolution”), please use HDMI cables 5.0 meters
(16.4 ft.) or less.
Recommended part number:
RP-CDHS15 (1.5 m/4.9 ft.), RP-CDHS30 (3.0 m/9.8 ft.),
RP-CDHS50 (5.0 m/16.4 ft.), etc.
AV OUT
HDMI IN
Television
HDMI cable
(not supplied)
DMP-B200P&PC-VQT3C15_eng.book 21 ページ ２０１０年１２月２２日 水曜日 午後６時２分