Overview, The unit – Panasonic DMP-B200 User Manual
Page 8
VQT3C15
8
Overview
Instructions for operations are generally described using the
remote control in these operating instructions.
Front View
Rear View
1
LCD screen
2
Speaker
3
Disc lid
4
Open the disc lid
5
Turn the unit on and off (
> 12)
6
[
Í] indicator (> 10)
When the unit is connected to the AC mains supply, this
indicator lights up in standby mode and goes out when the
unit is turned on.
7
[CHARGE] indicator (
> 11)
While recharging the battery pack, this indicator lights up.
8
Remote control signal sensor (
> 9)
9
Change the screen settings (
> 13)
10 Adjust the volume (
> 14)
11 Show the sub menu
12 Selection/OK
13 Headphone terminal [
Ë]
(
‡ 3.5 mm stereo mini jack)
14 Switch the media to playback
It will switch every time it is pressed.
15 Playback (
> 14)
16 Stop (
> 15)
17 Skip title numbers, etc. (
> 15)
18 Return to previous screen
19 DC IN terminal (
> 10)
20 HDMI AV OUT terminal (
> 21)
21 SD card slot (
> 13)
22 Exhaust opening
23 Battery pack (supplied)
The Unit
1
2
8
3
4
5
7
6
9
1 0
1 1
1 2
1 3
14
15
16
17
18
DISC/SD
RETURN
2 0
2 1
2 3
1 9
2 2
≥ To select: Press up, down, left, or right ([3, 4, 2, 1])
≥ To enter: Press [OK]
About the exhaust opening:
Do not block the exhaust opening on the side, or use in
a place that will block the exhaust opening.
The heat will build up internally, and may cause a fire or
deformation of the outer casing.
DISC
SD
DMP-B200P&PC-VQT3C15_eng.book 8 ページ ２０１０年１２月２２日 水曜日 午後６時２分