Planet Technology XRT-104D - Manual (Page 43)

38
Internet/WAN Port) to a particular LAN private IP address and its service port number. (See
Glossary for an explanation on Port number)
Parameters Description
Enable Virtual Server
Enable Virtual Server.
Private IP
This is the LAN client/host IP address that the Public Port
number packet will be sent to.
Note: You need to give your LAN PC clients a fixed/static IP
address for Virtual Server to work properly.
Private Port
This is the port number (of the above Private IP host) that the
below Public Port number will be changed to when the packet
enters your LAN. (to the LAN Server/Client IP)
Type
Select the port number protocol type (TCP, UDP or both). If you
are unsure, then leave it to the default both protocols.
Public Port
Enter the service (service/Internet application) port number from
the Internet that will be re-directed to the above Private IP
address host in your LAN.
Note: Virtual Server function will have priority over the DMZ
function if there is a conflict between the Virtual Server and the
DMZ settings.
WAN Port
Assign the WAN port that you want to bind to the virtual server.
All the packets sending from this WAN port with the assigned
public port will be directed to the assign private IP and private
port.
Comment
The description of this setting.
Add Virtual Server
Fill in the "Private IP", "Private Port", "Type", “Public Port” and
"Comment" of the setting to be added and then click "Add". Then