Panasonic KX-TG9391 - Manual (Page 18)

Making/Answering Calls
18 For assistance, please visit http://www.panasonic.com/help
Making calls
Using the base unit :
1 Dial the phone number.
L To correct a digit, press {CLEAR}.
2 Lift the corded handset.
L An available line is automatically selected
and either the LINE1 indicator or LINE2
indicator lights up. To change the line
selection mode, see page 17.
L You can also select the line manually by
pressing {LINE 1} or {LINE 2} before lifting
the corded handset.
3 When you finish talking, place the corded
handset on the cradle.
Note:
L You can also dial the phone number after lifting
the corded handset.
L To switch to the cordless handset, press {LINE
1} or {LINE 2} on the cordless handset, then
place the corded handset on the cradle.
Using the speakerphone
1 During a conversation with the corded
handset, press {SP-PHONE} to turn on the
speakerphone.
L You can place the corded handset on the
cradle.
L Speak into the MIC.
L Speak alternately with the other party.
2 When you finish talking, press {SP-PHONE}.
Note:
L For best performance, use the speakerphone in
a quiet environment.
L To switch to the receiver, lift the corded handset.
Using the handset Y
1 Lift the handset and dial the phone number.
L To correct a digit, press {CLEAR}.
2 {C}
L An available line is automatically selected
and the line number is displayed. To change
the line selection mode, see page 17.
L You can also select the line manually by
pressing {LINE 1} or {LINE 2}.
3 When you finish talking, press {OFF} or place
the handset on the charger.
Note:
L The LINE1 indicator or LINE2 indicator on the
base unit lights up while using the handset.
Using the speakerphone
1 During a conversation, press {s} to turn on
the speakerphone.
L Speak alternately with the other party.
2 When you finish talking, press {OFF}.
Note:
L For best performance, use the speakerphone in
a quiet environment.
L To switch to the receiver, press {C}.
Adjusting the receiver or speaker
volume
Press {^} or {V} repeatedly while talking.
Making a call using the redial list
The last 10 phone numbers dialed are stored in the
redial list in each unit (each 48 digits max.).
1 { REDIAL}
2 {V} /{^}: Select the desired phone number.
3 Proceed with the operation for your unit.
Base unit: Lift the corded handset.
Handset: {C}
Erasing a number in the redial list
1 { REDIAL}
2 {V} /{^}: Select the desired phone number.
i {ERASE}
3 {V} /{^}: “Yes” i {SELECT}
4 Proceed with the operation for your unit.
Base unit: {
■} (EXIT)
Handset: {OFF}
Pause (for PBX/long distance service
users)
A pause is sometimes required when making calls
using a PBX or long distance service. When
: Base unit / Y Handset
: Base unit / Y Handset
TG9391.book Page 18 Tuesday, July 8, 2008 8:01 AM