Registering a unit – Panasonic KX-TG9391 User Manual

Page 32

Advertising
background image

Programming

32

For assistance, please visit http://www.panasonic.com/help

2

Proceed with the operation for your unit.
Base unit: {

■} (EXIT)

Handset: {OFF}

Registering a unit

Operating additional handsets

Additional handsets
Up to 6 handsets can be registered to the base
unit.

Important:

L

See page 5 for information on the available
model.

Registering a handset to the base
unit

The supplied handset and base unit are pre-
registered. If for some reason the handset is not
registered to the base unit, register the handset.

1

Handset:
{

MENU} i {#}{1}{3}{0}

2

Base unit:
Press and hold {LOCATOR} for 5 seconds
until the registration tone sounds.

L

If all registered handsets start ringing, press
the same button to stop. Then repeat this
step.

L

The next step should be completed within
90 seconds.

3

Handset:
Press {OK}, then wait until a long beep
sounds.

Note:

L

When you purchase an additional handset, refer
to the additional handset’s installation manual
for registration.

Deregistering a handset

A handset can cancel its own registration (or the
registration of another handset) that is stored in the
base unit. This allows the handset to end its
wireless connection with the system.

1

{

MENU} i {#}{1}{3}{1}

2

{

3}{3}{5} i {OK}

3

Select the handset you want to cancel by
pressing the desired handset(s) number.

L

The selected handset number(s) flashes.

L

To cancel a selected handset number,
press the number again. The number will
stop flashing.

4

{

OK} i {V}/{^}: “Yes” i {SELECT}

L

When you cancel a different handset than
the one you are now using, press {OFF} to
exit.

Y Handset

TG9391.book Page 32 Tuesday, July 8, 2008 8:01 AM

Advertising
This manual is related to the following products: