Panasonic DP-C354 - Manual (Page 194)

194
C
hapt
er 8 R
eadi
ng R
epor
ts/
Li
st
s
(6) Communication result “OK” indicates that the communication was successful.
“Busy” indicates that the communication has failed because of busy
line.
“Stop” indicates that STOP was pressed during communication.
“P-OK” indicates that memory overflow occurred while storing the
documents into the memory for transmission but successfully
stored document(s) was sent.
“R-OK” indicates that the Relayed XMT was successful.
“B-OK” indicates that the Batch Transmission was successful.
“M-OK” Indicates that the memory reception/ substitute reception was
successful.
“- -” indicates LAN transmission.
“3-digit Info Code” indicates that the communication has failed.
Refer to Information Codes (see page 208).
In this case, the machine will print the attached report
with first page of your document as shown on the
previous page.
(7) Key name or mark mark indicates dialing by direct number dialing.
(8) Recorded name in the
Address Book, direct
dialing number, or Email
Address Recorded name in the Address Book, direct dialing number, or Email
Address.
(9) Number of pages
transmitted or received The 3-digit number is the number of pages successfully transmitted or
received.
When the documents are stored into the memory, two 3-digit numbers will
appear.
The first 3-digit number represents the number of pages successfully
transmitted.
The second 3-digit number represents the total number of pages that were
attempted to be transmitted.
(10) Duration of
Communication Duration of Communication.
No. Item Explanation