Panasonic DP-C354 - Manual (Page 43)

43
Chapter 2 Basic Fax Transmission
Rotated Transmission
If an A4/Letter-sized document is loaded in a portrait position, it could be interpreted as an A3/Ledger
size on the receiving station. To avoid this misinterpretation, the machine is configured to support
rotated transmission.
Set “78 Rotation XMT” to “Valid” in Function Parameters (Fax/Email Settings> Fax Parameters). This
allows an A4/Letter-size document to be rotated by 90 degrees automatically when they are loaded in
a portrait position, so that it is transmitted in the same orientation as it would have been loaded in a
landscape position.
z The standard setting of “78 Rotation XMT” is set to “Valid”. For instructions on how to change the standard
setting, refer to Fax/Email Settings in the Operating Instructions (For Function Parameters) on the provided
CD-ROM.
z The rotated transmission feature only works with memory transmissions, and not with direct transmissions.
„ Rotation XMT set to “Valid”
„ Rotation XMT set to “Invalid”
Sender
Receiver
Rotated 90 degrees
Set as Portrait
Set as Landscape
Scanning Direction
A4/Letter
Scanning Direction
Scanning
Width
Sender
Receiver
Prints on A3/Ledger size
Print size reduced to 70%
Set as (Portrait)
Prints on A4/Letter size
100%