Panasonic PT-43LC14 - Manual (Page 19)

19
Getting Start
ed
RGB signals that can be input
The table below lists the different types of RGB signals that can be input.
If a signal which differs greatly from any of the types listed below is input, the picture image may not be
dis played correctly, or a black background may be displayed. At this time, “signal” will fl ash in the on-screen
display for about 5 seconds.
Notes:
• The D-SUB15P connector can accept RGB (H-V sync separate).
• When used with an external video processor/scaler, it must have RGB (H-V sync separate) output.
Mode type
Signal data
display
No. of dots
(H X V)
Horizontal
frequency
(kHz)
Vertical frequency
(Hz)
Personal Computer
Signals
VGA400 (70 Hz) 640 X 400 31.47 70.08 VGA400 70
VGA480 (60 Hz) 640 X 480 31.47 59.94 VGA 60
SVGA (60 Hz) 800 X 600 37.88 60.32 SVGA 60
XGA (60 Hz) 1 024 X 768 48.36 60.00 XGA 60
DTV Format Signals
480i 664 X 485 15.73 29.97 480 i
480p 720 X 483 31.47 59.94 480 p
720p 1 280 X 720 45.00 60.00 720 p
1080i 1 920 X 1 080 33.75 30.00 1080 i
Installation