Photo viewer (sd card/pc card), 69 advanced op er a tion – Panasonic PT-43LC14 User Manual

Page 69

Advertising
background image

69

Advanced Op

er

a tion

0(183$*(

6,1*/(

6/,'(

6'3&

$&&(66B3$1$

Index Area
Folders and fi les are
displayed here.
Notes:

• Up to 1 000 JPEG fi les can

be displayed. (This number
may be lower if subfolders,
or fi les other than JPEG are
included in the folder.)

• Depending on JPEG

fi le type, “JPEG” will
be displayed instead of
thumbnail image.

• Only JPEG fi les can be

displayed.

Display Page No.
When the displayed
fi les/folders fi ll more than
one page, the total number
of pages is displayed.

Card Menu Screen

Folder Name Area
The name of the selected
subfolder (framed in yellow) is
displayed.

The screen below is displayed automatically when a card is inserted. If “NO CARD” appears, confi rm that a
card is correctly inserted.

Subfolder
The subfolder of
the currently
displayed folder is
opened.

Parent Folder
Returns currently
displayed folder to the
parent (previous)
folder.

ACCESS Indication
ACCESS is displayed
while data is read.

Menu Area
Select display method
(SINGLE PLAY or
SLIDE SHOW).
Confi rm the displayed
card type (SD Card or
PC Card).

SD Card slot

SD Card
MultiMediaCard

Compatible Card

Front Card Slot (P. 10)

SD Card

Press PC Card
EJECT TAB twice.

• The media* listed in the right column above can be read via

the PC Card in the PC Card adaptor.

• Hard disk PC Cards, Flash ATA Cards, and other recorded

media cannot be used.

• Place the selected media onto the PC Card and then insert

into the PC Card Slot.

• When both an SD Card and PC Card are inserted, the SD

Card contents has priority and will be displayed.

• If the Card is unusable, “CARD FORMAT NOT SUPPORTED”

is displayed on-screen. Remove the Card only when
ACCESS is not displayed.

• If an incompatible JPEG fi le is displayed (full size fi le

preview), “DATA FORMAT NOT SUPPORTED” is displayed.

Press in lightly
on SD Card,
then release.

Insert the Card.

Remove the Card.

Notes:

• Insert/remove Card while “Card Menu Screen” or “NO CARD”

is displayed.

• Be sure ACCESS is not displayed before Card

insertion/removal.

• Fully insert the Card (ACCESS is displayed). Wait until

ACCESS goes out before removing.

• Before reinserting a Card after removing it, wait until “NO

CARD” is displayed. If there are Cards in both Card Slots,
wait until the Card Menu Screen of the other Slot is displayed
and ACCESS is no longer displayed before reinserting a
Card.

PC Card

PC Card slot

Compact Flash*
Smart Media*
Memory Stick*
xD Picture Card*

Photo Viewer (SD Card/PC Card)

Advertising