Pioneer PDP-LX508G - Manual (Page 15)

Preparation 05
15
En
Eng
lis
h
Chapter 5
Preparation
Installing the plasma television
Location
• Avoid direct sunlight. Maintain adequate ventilation.
Caution
• If you do not leave sufficient space above the plasma television,
it will not receive enough ventilation and will not operate
properly.
• Pioneer will not be responsible for accident or damage caused
by inadequate installation or stabilization, erroneous
operation, remodeling or natural disasters.
Note
• Allow enough space around the upper and back parts when
installing to ensure adequate ventilation of the rear of the unit.
• Be sure to install the plasma television in a flat, stable location.
Using the optional Pioneer stand
For details on installation, refer to the instruction manual supplied
with the stand.
Using the optional Pioneer speakers
For details on installation, refer to the instruction manual supplied
with the speaker.
Moving the plasma television
When installing on a rack, etc., hold the plasma television as
shown below. Because the plasma television is heavy, be sure to
have someone help you when moving it.
(for PDP-LX608G)
(for PDP-LX508G)
Note
• Do not use the speaker to support the weight of the plasma
television.
• Do not hold the plasma television by the speaker mounting
fittings.
Over
10 cm
Over 50 cm