Pioneer PDP-LX508G - Manual (Page 42)

Useful adjustment settings 09
42
En
Resetting the password function
1 Press HOME MENU.
2 Select “Setup“ ( / then ENTER).
3 Select “Password“ ( / then ENTER).
The password entry screen appears. Enter your four-digit password
using buttons
0 to 9.
4 Select “Reset“ ( / then ENTER).
5 Select “Yes“ ( / then ENTER).
6 Press HOME MENU to exit the menu.
Note
• The above procedure will reset the password to the factory
default (1 2 3 4).
We suggest you write down your password so you don’t forget it.
If you forget the password
When the message “Please Input Your Password” is displayed,
press the
ENTER button on the remote control unit and hold it
down for three seconds or longer.
The password reverts to “1234”.
PDP-LX608G / PDP-LX508G
Your password No.: