Pioneer DEH-6300UB - Manual (Page 11)

3 Turn M.C. to select the initial setting.
After selecting, perform the following proce-
dures to set the initial setting.
CLOCK SET (setting the clock)
1 Press M.C. to display the setting mode.
2 Press M.C. to select the segment of the clock
display you wish to set.
Hour
—Minute
3 Turn M.C. to adjust the clock.
AUX (auxiliary input)
Activate this setting when using an auxiliary de-
vice connected to this unit.
1 Press M.C. to turn AUX on or off.
USB PNP (plug and play)
This setting allows you to switch your source to
USB/USB-iPod/PANDORA automatically.
1 Press M.C. to turn the plug and play function
on or off.
ON
– When a USB storage device/iPod is con-
nected, depending on the type of device, the
source is automatically switched to
USB/USB-
iPod/PANDORA when you turn on the engine.
If you disconnect your USB storage device/
iPod, this unit
’s source is turned off.
OFF – When USB storage device/iPod is con-
nected, the source is not switched to USB/
USB-iPod/PANDORA automatically. Please
change the source to
USB/USB-iPod/PAN-
DORA manually.
SW CONTROL (rear output and subwoofer set-
ting)
The rear speaker leads output and RCA output
can be used for full-range speaker or subwoofer
connection.
If you switch to
REAR SP :SW, you can connect a
rear speaker lead directly to a subwoofer without
using an auxiliary amp.
Initially,
REAR SP is set for rear full-range speaker
connection ( FUL).
1 Press M.C. to display the setting mode.
2 Turn M.C. to change the output and press to
select.
REAR SP
—PREOUT
3 Turn M.C. to change the setting.
REAR SP: FUL —SW
PREOUT: SW —REA
! Even if you change this setting, there will
be no output unless you turn the sub-
woofer output on (refer to
SW SETTING 1
(subwoofer on/off setting) on the previous
page).
! If you change this setting, subwoofer out-
put in the audio menu will return to the fac-
tory settings.
4 Press M.C. to confirm the selection.
DEMO (demo display setting)
1 Press M.C. to turn the demo display on or off.
EVER SCRL (scroll mode setting)
When ever scroll is set to ON, recorded text infor-
mation scrolls continuously in the display. Set to
OFF if you prefer the information to scroll just
once.
1 Press M.C. to turn the ever scroll on or off.
Other Functions
Selecting the illumination color
This unit is equipped with multiple-color illumi-
nation. You can select a desired color from the
color list.
Direct selection from the
illumination color list
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select ILLUMINATION.
3 Turn M.C. to select KEY COLOR (button il-
lumination) or LCD COLOR (display illumina-
tion); press to confirm.
4 Turn M.C. to select the illumination color.
You can select one option from the following list.
! 30 preset colors (WHITE to ROSE)
! SCAN (cycle through all colors)
! CUSTOM (customized illumination color)
5 Press M.C. to confirm the selection.
Notes
! When SCAN is selected, the illuminated
color automatically cycles through the 30
preset colors.
! When CUSTOM is selected, the customized
color saved is selected.
Customizing the illumination color
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select ILLUMINATION.
3 Turn M.C. to select the preset color or
CUSTOM illumination color.
# You cannot create a custom illumination color
when
SCAN is selected.
4 Press M.C. and hold until the customizing
illumination color setting appears in the dis-
play.
5 Press M.C. to select the primary color.
R (red) —G (green)—B (blue)
6 Turn M.C. to adjust the brightness level.
Adjustment range: 0 to 60
# You cannot select a level below 10 for all three of
R (red), G (green), and B (blue) at the same time.
# You can also perform the same operation on
other colors.
7 Press M.C. and hold until CUSTOM ap-
pears.
Using an AUX source
1 Insert the stereo mini plug into the AUX
input jack.
2 Press SRC/OFF to select AUX as the
source.
Note
AUX cannot be selected unless the auxiliary set-
ting is turned on. For more details, refer to
AUX
(auxiliary input) on this page.
Turning the clock display on or off
% Press and hold TAG/ to turn the clock
display on or off.
Note
The clock display disappears temporarily when
you perform other operations, but the clock dis-
play appears again after 25 seconds.
English
Operating this unit 02
11
Section
Operating this unit
En