Pioneer RS-D7R - Manual (Page 26)

26
Audio Adjustment <Equalizer>
Setting the equalizer curve
• You can switch between the left/right combine mode and left/right independent mode at
any time. So even when using the left/right independent mode, you can switch to the
left/right combine mode to perform adjustments.
Note:
• Even when using the left/right combine mode you can switch to display left and right channels, but
adjustments are those performed in the left/right combine mode.
Note:
• You cannot set the intervals of the adjacent 2 bands to less than 1/3 of an octave.
7. Press the
5/∞ buttons and
adjust the level.
6. Press the
2/3 buttons and select
the desired frequency to be
adjusted.
5. Press the FUNCTION button 3
and select the desired band to be
adjusted.
Each press the FUNCTION button 3
switches to next band.
4. Press the FUNCTION button 1 and select left or right channel.
(Only for L/R mode.)
Each press the FUNCTION button 1 switches left and right channel.
3. Press the FUNCTION button 1 for two seconds and switch between
left/right independent mode (L/R) and left/right combine mode (COM).
2. Press the FUNCTION button 5 to select the 3-band parametric equalizer
mode.
1. Open the cover of the remote control in the equalizer menu
(refer to page 5).
This switches to equalizer menu setting screen.
ENG/MASTER 96
26