2 utility operating – Planet Technology ENW-9607/9607M User Manual
Page 16
Advertising
13
3. Please check the installation note and click
“Next” to continue.
4. Please click
“Install” to begin the installation.
5. Please click
“Finish” to complete the utility installation.
4.2 Utility Operating
After installation, you can find the utility in
“Start” => “Programs” => “Marvell” => “Virtual Cable
Tester
”. Please click “Virtual Cable Tester” option to start. If you see the dialog box as below,
please make sure you are using ENW-9607 and the card had been install to your PC properly.
When the utility starts, you will see the screen as below. If you install two or more ENW-9607 to
Advertising