Panasonic WV-CU360C - Manual (Page 49)

50
Note: Auxiliary control may be ignored while zooming,
focusing or panning/tilting is in operation.
■ Alarm Operation
When the WV-CU360C receives an alarm signal from the
WJ-FS616/FS616C, the alarm indicator blinks. The alarm
indicator changes from blinking to steady light when the
alarm is automatically reset. The camera number appears
in the camera section of the LED display.
● Alarm Reset
1. Press the ALM RESET button while the ALT indicator is
not lit. An activated alarm is reset and the alarm indica-
tor on the controller goes off.
2. To reset all alarms issued by the multiplexers connect-
ed in a daisy chain, press the ALT button, then press
the ALM RESET buttons.
● Alarm Suspension
1. Press the ALM SUSPEND button for more than 2 sec-
onds to suspend the alarm. The ALM SUSPEND indi-
cator lights up.
2. Press the ALM RESET button to reset alarm suspen-
sion. The ALM SUSPEND indicator goes off.
■ VTR (VCR) Control
You can operate a VTR (VCR) connected to the Video
Multiplexer from the controller using the buttons listed
below with the ALT indicator lit.
Function
Rewind
Pause
Fast Forward
Reverse Play
Stop
Playback
T/L (time-
lapse) Mode
Down
Up
Recording
Logo Note
e.g., change from 72H mode
to 24H mode
e.g., change from 24H mode
to 72H mode
ALM RESET
ALL RESET
ALM RESET
ALL RESET
ALM SUSPEND