Pioneer MEP-7000 - Manual (Page 4)

4 DJS Ver. 1.600
1
1-2
Setting the Audio Output
Set the audio output on the DJS [DJ Play] screen to the Audio output connectors (A & B)of the
MEP-7000’s drive unit. Start up DJS and make the settings on the [Mixer/Sound Card] screen
in Preferences.
Output player A audio on the [DJ Play] screen to:
Set to the Audio output connectors A of the MEP-7000’s drive unit.
Output player B audio on the [DJ Play] screen to:
Set to the Audio output connectors B of the MEP-7000’s drive unit.
1
Open the [Mixer/ Sound Card] settings screen in Preferences.
• On the settings menu on the left hand side of Preferences, click [Mixer/ Sound
Card] to open the [Mixer/ Sound Card] settings screen.
2
Click [External Mixer] and then click [ASIO].
3
Select the Audio output connectors of the MEP-7000 as a sound card.
• Sound Card 1 (SC1) :
Click the [Sound Card 1 (SC1)] check box ON and then click [PIONEER MEP-
7000 ASIO: MEP-7000 A] to select it.
• Sound card 2 (SC2) :
Click the [Sound Card 2 (SC2)] check box ON and then click [PIONEER MEP-
7000 ASIO: MEP-7000 B] to select it.
• Selecting a Sound Card :
You can select audio devices other than the MEP-7000 as the sound card. When
one is selected, the DJS audio is output from the selected audio device and audio is
not output from the MEP-7000 Audio output connectors.
4
Click [OK].
• Once you click [OK], the [Mixer/Sound Card] setting screen will close.
Changing DJS Settings
Make changes to the various DJS settings on the
different Preferences settings screens.
After clicking [File] on the DJS menu, click
[Preferences].
Note
Connecting to an External Mixer
Connect the AUDIO OUT jacks (A & B) of the
MEP-7000’s drive unit to the corresponding
AUDIO IN jacks of the DJ mixer. Connect the
white plugs of the audio cable that comes with the
MEP-7000 to the white L (left) jacks and the red
plugs to the red R (right) jacks.
If an internal mixer is selected
If an internal mixer is selected, the MEP-7000’s
drive unit cannot be selected as the AUDIO OUT
(sound card).
Selecting ASIO or DirectX
The drive unit of your MEP-7000 is ASIO
compliant, so we recommend that you select
ASIO.
MEP-7000 Output Jacks
You cannot select [PIONEER MEP-7000 ASIO:
MEP-7000 B] as sound card 1 (SC1).
You cannot select [PIONEER MEP-7000 ASIO:
MEP-7000 A] as sound card 2 (SC2).
Adjusting the Delay Time
When the MEP-7000’s drive unit is being used, no
adjustments in the delay time are required. Set the
delay time of sound card 1 (SC1) and sound card
2 (SC2) to 0 msec.
Adjusting the Buffer Size
If the audio gets interrupted during playback,
increase the size of the buffer.
Note
Note