Planet Technology WL-U356 - Manual (Page 18)

14
3.2 More Setting…
You can enter this screen by clicking the “More Setting…” button. Here you can specify the
wireless network to which WL-U351 intends to connect, enable/disable the WEP data encryption,
save or load the settings into/from the profile, etc.
u General Connection Setting: Displays the information including Channel, SSID, Tx Rate
and Network Type. You can click the “Change” button to modify these values.
Ø Channel: Shows the number of the radio channel used for the wireless networking.
This parameter is not configurable in the Infrastructure mode.
Ø Tx Rate: Shows the Data Transfer Rate. There are
Auto/1/2/5.5/11/6/9/12/18/24/36/48/54Mbps for selection. If the Auto Mode is
selected, the device will choose the most suitable transmission rate automatically.
Ø SSID: Shows the SSID of the current associated wireless network.
Ø Any: If “Any“ check box is enabled, WL-U356 will survey and connect to one of the
available wireless networks without checking the consistency of the channel and
SSID with the specified wireless device.
Ø Network Type:
Infrastructure: This mode requires the presence of an AP or Router to create a
wireless network. All the communication is processed through the AP or Router.