Paradyne Hotwire 5038-A1-00 - Manual (Page 5)

98-15841
Distributed
POTS Splitter
Wall
Fastener
PHONE
LINE
DSL
5
Optional Alternative Placement
The POTS splitter is designed for tabletop placement. The POTS splitter can also be
mounted on a wall. To mount a POTS splitter on the wall, you will need:
- Two #6 self-threading screws with molly bolts for each housing
- Drill and 3/16
″
drill bit for the molly bolt
- Screwdriver
"
Procedure
To mount the POTS splitter:
1. Use a drill to install the plastic anchors.
2. Use a screwdriver to install the screws.
Leave enough clearance for quick removal
of the POTS splitter housing.