Pioneer SH-DT510 - Manual (Page 16)

16
Chapter 3: Channel Setting
Introduction
After finishing the hardware installation as described in Chapter 2, switch on the
tuner.
It will display Data base is Empty and instruct you to press the "MENU"
button on the remote control.
The following menu will be displayed after pressing the "MENU" button.
• Initial Screen
Menu
CH SETUP
INSTALLATION
SET UP
Description
Set up favorite channels in the Favorite list, set
up, control and activate Parental Guidance and
Password
Search channels using one of three scan modes.
General setup for the tuner, update the tuner's
software version
Note:
Use the "MENU" button on the RCU to display the Main Menu, the arrow
buttons to move through the menus, the "ENTER" button to choose specific
items, and "RETURN" button to return to the previous menu.