Specifications, Sound adjustment, Product service – Panasonic SCEN38 User Manual

Page 9

Advertising
background image

9

RQTV0288

g

AMPLIFIER SECTION

FTC OUTPUT POWER both channel
driven simultaneously

10 % total harmonic distortion (THD)
1 kHz

2.8 W per channel (6 Ω)

RMS OUTPUT POWER both channel
driven simultaneously

10 % total harmonic distortion (THD)
1 kHz

3 W per channel (6 Ω)

Input Music Port

Sensitivity

100 mV, 15 kΩ

Terminal

Stereo, 3.5 mm (1/8”) jack

Output Headphone

Terminal

Stereo, 3.5 mm (1/8”) jack

(16 Ω to 32 Ω)

g

TUNER SECTION

Frequency range

FM

87.9 MHz to 107.9 MHz (200 kHz)

87.5 MHz to 108.0 MHz (100 kHz)

AM

520 kHz to 1710 kHz (10 kHz)

g

CD SECTION

Disc played [8 cm (3) or 12 cm (5)]
(1) CD-Audio (CD-DA)
(2) CD-R/RW (CD-DA, MP3)
(3) MP3

Sampling frequency

CD

44.1 kHz

MP3

32 kHz, 44.1 kHz, 48 kHz

Bit rate

MP3

32 kbps to 384 kbps

Decoding

16/20/24 bit linear

Pick up

Wavelength

785 nm

Laser power

CLASS 1

Audio output (Disc)

Number of channels

2 channel

Audio performance

Frequency response (CD-Audio)

20 Hz to 20 kHz

Wow and flutter Below measurement limit
Digital filter

8

D/A converter

MASH (1 bit DAC)

g

SPEAKER SECTION

Type 1 way, 1 speaker system (Bass reflex)
Speaker unit(s)

Full range

7 cm (2

3

/

4

”) cone type

Impedance

6

Input power (IEC)

3 W (Max)

Dimensions (W x H x D)

120 mm x 202.8 mm x 133.5 mm

(4

3

/

4

” x 7

15

/

16

” x 5

1

/

4

”)

g

GENERAL

Power supply

AC 120 V, 60 Hz

Power consumption

30 W

Dimensions (W x H x D)

252.5 mm x 202.8 mm x 133.5 mm

(9

15

/

16

” x 7

15

/

16

” x 5

1

/

4

”)

Mass

With speakers

Approx. 3.2 k

g (7.1 Ibs)

Without speakers Approx. 1.9 k

g (4.2 Ibs)

Operating temperature range

0 °C to +40 °C (+32 °F to +104 °F)

Operating humidity range

35 % to 80 % RH (no condensation)

1. Damage requiring service—The unit should be serviced by qualified

service personnel if:
(a) The AC power supply cord or AC adaptor has been damaged; or
(b) Objects or liquids have gotten into the unit; or
(c) The unit has been exposed to rain; or
(d) The unit does not operate normally or exhibits a marked change in
performance; or
(e) The unit has been dropped or the cabinet damaged.

2. Servicing—Do not attempt to service the unit beyond that described

in these operating instructions. Refer all other servicing to authorized
servicing personnel.

3. Replacement parts—When parts need replacing ensure the servicer

uses parts specified by the manufacturer or parts that have the same
characteristics as the original parts. Unauthorized substitutes may result
in fire, electric shock, or other hazards.

4. Safety check—After repairs or service, ask the servicer to perform

safety checks to confirm that the unit is in proper working condition.

The servicer will require all components to service your system.
Therefore, should service ever be necessary, be sure to bring the entire
system.

For product information or assistance with product operation:
In the U.S.A., refer to “Customer Services Directory” on page 11.
In Canada, contact the Panasonic Canada Inc. Customer Care Centre at
1-800-561-5505, or visit the website (www.panasonic.ca), or an authorized
Servicentre closest to you.

You can choose one of four types of sound quality.
Press [PRESET EQ] to select the sound quality.

Each time you press the button:

Digital remaster is effective on CD (MP3)
Analog remaster is effective on iPod and Music Port
This feature reproduces the frequencies lost during recording to give you
a sound closer to the original.
Press [REMASTER] during play to select “RE-MASTER ON”.

Each time you press the button:

Enables you to enjoy the powerful bass effect.
Press [D.BASS] to turn the D.BASS function on/off.

The actual effect depends on the disc.

Power consumption in standby mode:

2.6 W (approx.)

Notes:

Specifications are subject to change without
notice.
Total harmonic distortion is measured by the
digital spectrum analyzer.

Specifications

You can create a three-dimensional sound field when listening to stereo
sound.
Press [SURROUND] to turn the Live Virtualizer on/off.

The actual effect depends on the source played.

EQ

Sound adjustment

Note

MP3

Page 3 for the buttons position of remote control.

Sound quality

Live Virtualizer

Enhancing the bass

Re-master -

Enjoying more natural sound

HEAVY

CLEAR

SOFT

EQ-OFF

VOCAL

(Adds punch to
rock)

(Clarifies higher
sounds)

(For background
music)

(Canceled)

(Adds gloss to vocals)

Note

You can set the timer to come on at a certain time to wake you up.
Preparation:

Turn the unit on and set the clock.
Prepare the music source (disc, radio, iPod or music port) and set the
volume.

Press [CLOCK/TIMER] repeatedly to select play timer.

CLOCK z

PLAY Original display

“ON TIME” is displayed. Within 5 seconds, press [u, 2] or

[i, 1] to set the starting time.

Press [CLOCK/TIMER] to confirm.

“OFF TIME” is displayed. Repeat steps 2 and 3 to set the finishing

time.

To activate the timer

Press [zPLAY] to turn on the timer.

Press [^] to turn off the unit.

To

Action

Change the settings

Repeat steps 1 to 4 and 6.

Change the source or
volume

Press

[zPLAY] to clear zPLAY indicator

from the display.

Make changes to the source or volume.

Perform steps 5 and 6.

Check the settings
(when the unit is on or
in standby mode)

Press

[CLOCK/TIMER] repeatedly to select

z

PLAY.

Cancel

Press

[zPLAY] to clear the timer indicator

from the display.

The timer will start at the preset time, with the volume increasing
gradually to the preset level.
The timer comes on at the set time every day if the timer is on.
The unit must be in the standby mode for the timer to function.
If you turn the unit off and on again while the timer is functioning, the
finish time setting will not be activated.
When MUSIC PORT or iPod is selected as the source when the timer
comes on, the system turns on and engages MUSIC PORT or iPod as
the source. If you wish to playback from the portable audio equipment,
activate the equipment’s play mode and increase the volume. (See the
portable audio equipment’s instruction manual.)




The model number and serial number of this product can be found on
either the back or the bottom of the unit.
Please note them in the space provided below and keep for future
reference.

MODEL NUMBER ___________________________________________

SERIAL NUMBER ___________________________________________

DATE OF PURCHASE ________________________________________
DEALER NAME _____________________________________________
DEALER ADDRESS __________________________________________
___________________________________________________________
TELEPHONE NUMBER _______________________________________

User memo:

Product information

Product Service

RE-MASTER ON

RE-MASTER OFF

SC-EN38_P,PC (RQTV0288)_running change1.indd 9

2/20/2008 9:55:12 AM

Advertising