Rolsen RL-15X11 - Manual (Page 18)

Setting up TV stations
Programme edit
Calling the programme table
18
8 - - - - -
0 C 04 5 - - - - -
1 S 03 6 - - - - -
2 S 04 7 - - - - -
3 C 06 8 - - - - -
4 C 33 9 - - - - -
()}{ OO OK OO LIST OO EXIT
8 - - - - -
Select a programme number to be
skipped with the
D / E or F / G button.
Press the BLUE button. The skipped pro-
gramme turns to blue.
Press the BLUE button again to release
the skipped programme.
When a programme number is skipped it
means that you will be unable to select it
using the
D / E button during normal TV
viewing. If you want to select the skipped
programme, directly enter the pro-
gramme number with the NUMBER but-
tons or select it in the programme edit or
table menu.
Repeatedly press the MENU button to
return to normal TV viewing.
5 5 1 1
Skipping a programme number
- You can check the programmes stored in the memory by displaying the programme table.
Press the LIST button to display the Programme table menu.
The programme table appears on the screen. One programme table con-
tains ten programmes as below.
You may find some blue programmes. They have been set up to be
skipped by auto programming or in the programme edit mode.
Some programmes with the channel number shown in the programme
table indicate there is no station name assigned.
Displaying programme table
Select a programme with the
D / E or F / G button.
Then press the OK button.
The set switches to the cho-
sen programme number.
2 2
Selecting a programme in
the programme table
There are 10 programme table pages
which contain 100 programmes.
Pressing the
D / E or F / G button
repeatedly turns the pages.
Repeatedly press the MENU button to
return to normal TV viewing.
3 3
Paging through a programme table