Rolsen RL-15X11 - Manual (Page 23)

23
EN
Sound adjustment
Language selection for dual language broadcast
If a programme received in two languages (dual language), you
can switch to
DUAL I , DUAL II or DUAL I+II by pressing the I/II
button repeatedly.
DUAL I sends the primary broadcast language to the loudspeak-
ers.
DUAL II sends the secondary broadcast language to the loud-
speakers.
DUAL I+II sends a separate language to each loudspeaker.
If your set is equipped with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II button repeatedly.
When NICAM mono is received, you can select NICAM MONO
or FM MONO.
When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to FM
mono.
When NICAM dual is received, you can select NICAM DUAL I ,
NICAM DUAL II or NICAM DUAL I+II or MONO . When FM
mono is selected the display MONO appears on the screen.
Mono sound selection
In stereo reception if the stereo signal is weak, you
can switch to mono by pressing the I/II button
twice. In mono reception the depth of sound is
improved. To switch back to stereo, press the I/II
button twice again.
In AV mode, you can select output sound for the
left and right loudspeakers.
Repeatedly press the I/II button to select the sound
output.
L+R :Audio signal from audio L input is sent to left
loud-speaker and audio signal from audio R input
is sent to right loudspeaker.
L+L : Audio signal from audio L input is sent to left
and right loudspeakers.
R+R : Audio signal from audio R input is sent to left
and right loud-speakers.
4 4
Stereo/Dual/NICAM reception