Powerex AS-XXX - Manual (Page 3)

2 0.5
ON 4 6
sec.
10 40 8 10 5 0.5 45
20 30 TEST OFF
min.
3
Climate Control Simplex
Example 1: To order a Simplex air compressor with a
3/4 Hp single-phase motor, 60 gallon tank, single-
phase 115 volt starter, automatic tank drain and an
air dryer, use product code AS-107-254.
Example 2: To order a Simplex air compressor with a
10 Hp three-phase motor, 200 gallon tank and an
auto drain, use product code AS-100-502.
}
Horsepower &
Voltage Phase
TABLE 2: MODEL NUMBER
Tank Size Starter
Tank
Drain/Dryer AS
Tank Size
(Gallons) Available on:
NA = Not Available
Tank Drain/Dryer Options
Starter Options
Motor Horsepower, Voltage Phase
1Ø Horsepower 3Ø
105 = 1/2 = 005
107 = 3/4 = 007
110 = 1 = 010
NA = 1 1 ⁄
2
= 015
NA = 2 = 020
NA = 3 = 030
NA = 5 = 050
NA = 7 1 ⁄
2
= 075
NA = 10 = 100
30 = 1 1/2 Through 1 1 ⁄
2
Hp
60 = 2 3/4 Through 2 Hp
80 = 3 2 Through 7 1 ⁄
2
Hp
120 = 4 5 Through 10 Hp
200 = 5 7 1 ⁄
2
and 10 Hp
None = 0
3Ø, 208V Starter* = 2
3Ø, 208/230V Starter** = 3
3Ø, 460V Starter = 4
1Ø, 115V Starter = 5
1 Ø, 208/230 V Starter = 6
1Ø vs 3 Ø selection must agree with
base model selection.
**This starter selection is dual
rated. Choosing digit “3”
means 230 V.
}
Manual Drain,
No Dryer = 1
E-Drain,
No Dryer = 2
Manual Drain,
with Dryer = 3
E-Drain,
with Dryer = 4
Available on
1/2 through 3 Hp
models only.
}
OR
Figure 3 - Auto E-Drain
Manifold
Assembly
AUTO E-DRAIN ASSEMBLY (See
Figure 3)
NOTE: The automatic E-drain is assem-
bled to tank.
1. Plug E-drain into 115V power outlet
supply.
2. Adjust times accordingly.