Pride Mobility Pride Profile INFMANU2127 - Manual (Page 3)

Installation and Care Instructions 3
Pride Profile www.pridemobility.com Rev B/January 2003
INTRODUCTION
Welcome to Pride Mobility Products Corporation (Pride). Congratulations
on the purchase of your new Pride Profile cushion. The Pride Profile is
designed with the most advanced state-of-the-art components to deliver
comfort, durability, and health maintenance features for active users.
This manual is intended as a supplement to the in-service training provided
by your authorized Pride provider. If you have any questions or problems
regarding the Pride Profile, please contact your authorized Pride provider.
USE
The Pride Profile is labeled to assure proper placement on the chair.
To place the Pride Profile on the chair:
1. Locate the “Front Bottom” label on the underside of the cushion.
2. Place the cushion on the seat so that the “Front Bottom” label is located
on the front of the seat, label side facing down. The zipper on the cushion
will face the rear side of the seat. See figure 1.
ZIPPER FACING
REAR SIDE OF SEAT
Figure 1. Cushion Placement