Pride Mobility Pride Profile INFMANU2127 - Manual (Page 4)

4 Installation and Care Instructions
Pride Profile www.pridemobility.com Rev B/January 2003
CLEANING
The Pride Profile can be easily cleaned.
To clean the Pride Profile:
1. Locate the zipper on the rear side of the outer cover. See figure 2.
2. Unzip the outer cover and pull out the inner cushion, which is wrapped
in a fluid resistant cover.
3. Wash the outer cover in a washing machine on the COLD setting.
CAUTION: Do not use bleach when washing the outer cover. Doing
so may cause damage to the cover.
4. Spray the inner fluid-resistant cover with a disinfectant, then wipe it clean.
CAUTION: Never submerge the inner cushion of your Pride Profile
in water. Doing so may cause damage to the cushion.
5. Allow both the outer cover and inner covers to air dry.
CAUTION: Do not attempt to put the outer cover in a dryer. This may
cause shrinking.
6. Once dry, put the inner cushion back inside the outer cover. Zip the outer
cover closed, and place the Pride Profile back onto the seat of your chair.
Figure 2. Pride Profile (Inner Cushion Removed)
OUTER COVER
INNER CUSHION WRAPPED
IN FLUID-RESISTANT COVER
ZIPPER ON
REAR SIDE