Panasonic CQ-C1103U - Manual (Page 10)

Radio (AM/FM )
Operation Flow
1
Press [SRC] (Source) to select the radio
source.
2
Press [BAND] to select a band.
3
Select a station.
Frequency adjustment
[TUNE]]: Lower
[TUNE[]: Higher
Note: Hold down either of them for more than 0.5
seconds and release it for station search.
Preset station selection
Press the corresponding preset button from [1] to [6] to
tune into a preset station.
[TUNE ]] [TUNE []
down/up the frequency. (Hold down it for
more than 0.5 seconds for seek tuning.)
[BAND]
selects a band in the radio source.
(APM) (Auto Preset Memory)
executes APM in the radio source. (Hold
down it for more than 2 seconds)
[DISP] (Display)
switches the information
on the display.
[D•M] (Direct Memory)
tunes into the station memorized in D•M.
(Hold down it for more than 2 seconds to
memorize the current station.)
[SRC] (Source)
selects a source.
Preset buttons [1] to [6]
selects a preset station in the radio
source,and presets the current station.
(Hold down it for more than 2 seconds)