Panasonic CQ-C1103U - Manual (Page 12)

Disc Player
Operation Flow
1
Press [SRC] (Source) to select the Disc
Player mode.
2
Select a desired portion.
Track selection
Press [TRACK s] or [TRACK d].
Note: To perform fast forward/reverse, hold down either
of them.
Pause
Press [BAND] (y / 5).
Press again to cancel.
Direct track selection
Press a track number button from [1] to [6].
¡ The corresponding track (1-6) starts playing.
Hold down a track number button from [1]
to [6] ((7) to (12)) for more than 2 seconds.
¡ The corresponding track (7-12) starts playing.
Caution
¡ Do not insert a disc when the indicator lights.
¡ Refer to the section of “Notes on Discs”.
¡ This unit does not support 8 cm {3"} discs.
¡ If you insert an 8 cm {3"} disc and cannot eject it, turn ACC of
your car off once and turn it on again, then press [u] (Eject).
¡ This unit does not support MP3 and WMA disc play-
back.
¡ This unit does not support CD text display.
¡ Do not insert foreign matter into the disc slot.
Disc slot
takes a disc in with the label-side facing up.
Note: The power will be turned on automatically
when a disc is loaded.
(y / 5) (Pause/Play)
toggles pause/play in
the player source.
[DISP] (Display)
switches the informa-
tion on the display.
[TRACK s] [TRACK d]
skip to the previous/next track in the player
mode.
Hold down either of them for fast reverse/fast
forward.
[SRC] (Source)
selects a source.
Direct selection buttons [1] to [6]
(7) to (12) (Hold down one of them
for more than 2 seconds.)
select a track directly.
[u] (Eject)
ejects the disc.
(SCAN)
toggles on/off the scan play. (Hold
down it for more than 2 seconds.)
[REP] (Repeat)
toggles on/off the repeat play.
(RANDOM)
toggles on/off the random play. (Hold
down it for more than 2 seconds.)
Printed side up