To turn off the answering system, Monitoring incoming calls, Automatic answering operation – Panasonic KX-TG6502 User Manual

Page 72: 72 to turn off the answering system, Base unit

Advertising
background image

Automatic Answering Operation

72

To turn off the Answering System

Press [ANSWER ON].

The indicator light goes out, and the unit announces “Answer off”.
To turn the Answering System off for one line when both lines are turned on, select

the line which you want to leave on by pressing [LINE SELECT], then press
[ANSWER ON].

Monitoring Incoming Calls

While a caller is leaving a message, you can monitor the call through the base unit

speaker.

To increase the speaker volume while monitoring, press [B]. To decrease volume,

press [d].

If both lines are receiving calls at the same time, only the first call can be

monitored.

To answer a call while monitoring, press the called line button on the base unit, or
press the called line soft key (

) or (

) on the handset.

To turn the incoming call monitoring feature off

When the base unit is not in use, press [d] repeatedly until “0” is displayed. (Make
sure the Answering System is turned on.)
OR
While monitoring, press [d] repeatedly until “0” is displayed.
If the incoming call monitoring feature is turned off, it will remain off when the next

call is monitored.

If you adjust the speaker volume while playing back messages or using the

speakerphone, the speaker volume for monitoring will be turned on again. To turn
the speaker volume off, see “To turn the incoming call monitoring feature off” of
above step.

Base Unit

LINE1

LINE2

TG6500.book Page 72 Friday, June 25, 2004 6:56 PM

Advertising
This manual is related to the following products: