POSIFLEX Business Machines 16560900020 - Manual (Page 13)

Part 13
Back side of
WB-6000VB
Then slide the main unit down to move the pegs into the lower slot part of the
holes till it clicks. Note that all the cables come out of the stand from the lower
edge and won’t get trapped by this mounting operation. If later on you want to
remove the main unit from the stand, you’ll have to press down the
lock/release button on back of the stand at the time lifting the main unit.
For desk top/counter application, the body of KS-6615/7315 occupies
a space of 378 mm wide, 304 to 321 mm deep and 294 to 362 mm high per
main unit tilt angle. The KS-6617/7317 is 426 mm wide, 354 to 326 mm deep
and 319 to 418 mm high. The minimum height of above models shall be
increased by about 4.5 mm if InfraRed type touch panel is used.
WALL MOUNTING
Select a flat surface on wall of adequate strength and
with proper ventilation and space condition. Please use the right
material to hold this terminal according to the wall material
(Drywall, concrete, solid wood, etc). Consult with your
contractor if it is necessary
.
A fully equipped system may
weigh up to 11 kg or 23 lbs. Please fix WB-6000VB at the holes inside the
guide holes circled in the picture to the wall or fix it to a VESA joint at bosses
on back side.
For WB-6300, WB-6600 and WB-6800 please separate the back
cover of the wall mount
bracket kit and fix it to
wall at the 3 or 4
arrowed holes as
appropriate according to
these pictures at right
per type of back covers
with proper materials
and proper preparations.
Install required optional
device kits with their
mechanical fixation parts in the wall mount bracket and hang the backpack to
the back cover that is already fixed on wall with the cables coming out of the
brackets through the openings marked with rectangles in the top row pictures
above. Screw lock the top side of the backpack.
WB-6300 WB-6600 WB-6800 WB-6000VB