After completing the massage, Cleaning and maintenance – Panasonic EP1080 User Manual

Page 16

Advertising
background image

15

English

AFTER COMPLETING THE MASSAGE

RETURN THE SEAT TO THE ORIGINAL POSITION

1

Check that there is nothing in the vicinity of

the backrest or the legrest.

2

Press the OFF/ON button twice.

The backrest and legrest will automatically return to their original
positions.
The backrest and the legrest can be returned with the reclining button.
(See Page 10)

3

Place the controller in its holder.

4

Return the pillow and the back cushion to

their original positions.

DISCONNECT THE POWER

See Warning No. 2 on page 1, No. 2 on page 2, and No. 10 on page 3.

1

Slide the power switch to the “off” position.

2

Turn the lock switch key to the “lock” position.

3

Unplug the power cord.

4

The lock switch key must be stored out of the reach of children.

CLEANING AND MAINTENANCE

See Danger No. 1 on page 1.

LEATHER COVERING ON THE PILLOW, THE BACK CUSHION AND THE UNIT

Wipe these areas with a soft, dry cloth.
(Do NOT use cloths containing any kind of chemical, etc.)
If the leather is particularly dirty, dampen with liquid soap and brush the surface. Wipe with a cloth dampened with water. Allow
to dry naturally.
(Do NOT use a hair dryer to try to dry the surfaces more quickly.)
Wearing of denim, colored, patterned or other clothing with a tendency to fade should be avoided during use, as it could lead to
discoloration of the leather.
Please do NOT use thinners, benzine or alcohol.

PIPE AND PLASTIC AREAS

1 Wipe the unit with a cloth that has been soaked in a mild detergent and then thoroughly wring out.
2 Next wipe the unit with a cloth that has been moistened with just water and thoroughly wring out.

*Make sure you thoroughly wring out the cloth first when cleaning the controller.

3 Allow the unit to dry naturally.

Please do NOT use thinners, benzine or alcohol.

COATED FABRIC

1 Wipe the seat fabric with a cloth that has been soaked in a mild detergent solution and then thoroughly wring out.
2 Use a brush to apply a mild detergent to areas where the coated fabric has become particularly soiled. Be careful not to brush

the fabric too much as this may damage it.

3 Next wipe the fabric with a cloth that has been moistened with just water and then thoroughly wring out.
4 Allow the fabric to dry naturally.

Please do NOT use thinners, benzine or alcohol.

Advertising