4 product specifications, Switch specification – Planet Technology FGSW-2620PVS User Manual

Page 6

Advertising
background image

Support full 48VDC power for any remote IEEE802.3af powered device (PD) like Wireless LAN Access Point, IP

phone, and LAN Camera.

Supporting power supply of 260 watts that provides sufficient power to the 24 remote devices.

Each Switching ports support full 48VDC power over unused twisted-pair wires to IEEE802.3af Powered Device.

2 open slots for 10/100Base-TX, 1000Base-T and 100Base-FX, 1000Base-SX/LX fiber-optic interface with various

connection media and distances (FGSW-2402PVS only)

2 10/100/1000Mbps ports and 2 SFP interfaces (FGSW-2620PVS and FGSW-2612PVS)

Auto-MDI/MDI-X detection on each RJ-45 port

Prevents packet loss with back pressure (half-duplex) and 802.3x PAUSE frame flow control (full-duplex)

High performance Store and Forward architecture, broadcast storm control, runt/CRC filtering eliminates

erroneous packets to optimize the network bandwidth

6K MAC address table, automatic source address learning and ageing

4 Mbit embedded memory for packet buffers

Console and Web interface for Switch basic management and setup

Support up to 26 port-based VLAN groups

Support up to 7 Trunk groups, each trunk for up to maximum 4 port with 800Mbps bandwidth

Port mirroring allows monitoring of the traffic across any port in real time

Support QoS and bandwidth control on each port

Misc Configuration for Switch advanced configuration

1.4 Product Specifications

Model

FGSW-2402PVS

FGSW-2620PVS

FGSW-2612PVS

Hardware Specification

Network Port

24 10/100Base-TX RJ-45 MDI/MDI-X ports

Module Slot

2 open slots for 10/100Base-
TX, 1000Base-T and
100Base-FX, 1000Base-SX
/LX fiber-optic interface

N/A; Fixed interfaces

N/A; Fixed interfaces

Gigabit Port

2; interface vary on module
installed

2 10/100/1000Mbps TP ports and 2 SFP interfaces (shared)

POE Port

24 (port #1 to #24)

12 (port#1 to #12)

Console Port

1 RS-232 DB-9 male

Dimension

440 x 200 x 44 mm (1U height)

Weight 2.6

kg

Power Requirement

100~240 (±10%) VAC, 50-60 (±3) Hz

System Power
Consumption

30 Watts maximum; 102 BTU / hr maximum

Switch Specification

Switch Architecture

Store-and-forward

Address Table

6K entries, auto learning/ageing

Shared Data Buffer

4 Mbit embedded memory for packet buffers

Advertising
This manual is related to the following products: