Setting the tv system, Resetting the player, Dvd-video regions – Pioneer DV-585K-s User Manual

Page 40: Selecting languages using the language code list, Additional information 08

Advertising
background image

Additional information

08

40

En

Setting the TV system

The default setting of this player is

AUTO

, and

unless you notice that the picture is distorted
when playing some discs, you should leave it
set to

AUTO

. If you experience picture distor-

tion with some discs, set the TV system to
match your country or region’s system. Doing
this, however, may restrict the kinds of disc you
can watch. The table below shows what kinds
of disc are compatible with each setting
(

AUTO

,

PAL

and

NTSC

).

1

If the player is on, press

STANDBY/

ON to switch it to standby.

2

Using the front panel controls, hold

down

then press

STANDBY/ON to

switch the TV system.

The TV system changes as follows:

AUTO

NTSC

NTSC

PAL

PAL

AUTO

Note

• You have to switch the player into standby

(press

STANDBY/ON

) before each

change.

Resetting the player

Use this procedure to reset all the player’s
settings to the factory default.

1

Switch the player into standby.

2

Using the front panel buttons, hold

down the

(stop) button and press

STANDBY/ON to switch the player back

on.

All the player’s settings are now reset.

DVD-Video regions

All DVD-Video discs carry a region mark on the
case somewhere that indicates which
region(s) of the world the disc is compatible
with. Your DVD player also has a region mark,
which you can find on the rear panel. Discs
from incompatible regions will not play in this
player. Discs marked

ALL

will play in any

player.

The diagram below shows the various DVD
regions of the world.

Selecting languages using the
language code list

Some of the language options (such as ‘DVD
Language’ in the Setup Navigator) allow you to
set your preferred language from any of the 136
languages listed in the language code list on
page 41.

1

Select ‘Other Language’.

2

Use the

/

(cursor left/right) buttons

to select either a code letter or a code
number.

3

Use the

/

(cursor up/down) buttons

to select a code letter or a code number.

See

Language code list

on page 41 for a

complete list of languages and codes.

Disc

Player setting

Type

Format NTSC PAL AUTO

DVD/Super
VCD/Video CD/
DivX Video

NTSC

NTSC PAL NTSC

PAL

NTSC PAL PAL

CD/MP3/WMA/
JPEG
no disc

NTSC PAL

NTSC
or PAL

1

2

2

5

5

6

3

2

1

4

4

DV585K_KARAOKE.book Page 40 Thursday, April 7, 2005 9:32 PM

Advertising