Panasonic PT-LW80NTE - Manual (Page 21)

Basic O
p
eration
Switching the projector on/off
E
NGLISH - 21
Before switching on the projector, make sure the mains lead and all the other devices are connected correctly.
See “Connections” on page 19 and “Mains lead” on page 20.
Q By control panel operation
Make sure CONTROL PANEL in OPTION menu is
set to VALID. The POWER button is locked to
prevent malfunction and the POWER LOCK
indicator lights in red.
1. Press the RELEASE button.
The POWER LOCK indicator goes off.
Without any operation in 10 seconds, the
POWER button will be locked again.
2. Press the POWER button in 10 seconds.
The POWER button beeps once.
3. The POWER indicator flashes in green several
times.
4. The POWER indicator lights in green and displays
the startup logo for 30 seconds.
When the STARTUP LOGO in OPTION menu is set
to OFF, the startup logo will not be displayed. See
“STARTUP LOGO” on page 37.
Q By remote control operation
1. Press the POWER button.
2. The POWER indicator flashes in green several
times.
3. The POWER indicator lights in green and displays
the startup logo for 30 seconds.
When the STARTUP LOGO in OPTION menu is set
to OFF, the startup logo will not be displayed. See
“STARTUP LOGO” on page 37.
Q By direct power on function
You can switch on the projector by connecting the
mains lead. See “Direct power on function” on
page 20.
Switching on the projector
FUNCTION
MENU RETURN
INPUT SELECT
RELEASE RELEASE
1
1
(2 - 3)
(1)
NOTE:
• When starting up the projector, some small rattling or tinkling sound may be heard, or the display may flicker for the
characteristics of the lamp. Those are normal and will not affect the performance of the projector.
• When the internal cooling fan is operating, some, operational sound may be heard. The loudness of the operational sound
depends on the external temperature.
• If the projector is switched on again while the internal cooling fan is still operating by the internal power supply, it may take
a while to start the projection.
• Press the control panel buttons firmly with a bare hand. Operating them with a light touch or covered hand, such as
plastered or gloved hand, may result in fail.