Panasonic KX-FLB756 - Manual (Page 43)

43
Receiving Faxes
ON
SET
FAX ONLY mode !
(all calls are received as faxes)
1 If the FAX ON light is off, turn it on by
pressing
PQ.
● The display will show the number of rings
before the unit answers a call in FAX ONLY
mode.
Display:
2 If you wish to change the ring setting, press
+ or - until the desired number is
displayed, and press
w.
● When receiving calls, the unit will
automatically answer all calls and only
receive fax documents.
FAX ONLY MODE
3 RINGS [±]
Line 1
– Phone calls
Line 2
– Faxes
Only a fax machine is connected.
Activating FAX ONLY mode
Note:
● If the FAX ON light is already on and you wish to
change the ring setting, turn it off once then on again
by pressing
PQ and follow the
instructions in step 2.
● This mode should not be used with a telephone line
which is used for both phone calls and faxes. Fax
communication will be attempted even if someone is
trying to call you. We recommend the following setup:
Example:
KX-FLB756 (040-043) 03.4.14 9:12 PM Page 43