Panasonic KX-FLB756 - Manual (Page 63)

Features Summary
63
To send a document:
1. Insert the document into the auto
document feeder.
2. Follow steps 1 and 2 above.
3. Press
+ or - to select “ON”.
4. Press w .
5. Enter the fax number.
6. Press
w .
7. Enter the transmission start time.
Press * to select “AM” or “PM”.
8. Press w .
9. Press p .
● To cancel after programming,
press
{ then w .
How to set menu options
Programming table
Code
#22
Setting the journal report to print
automatically
AUTO JOURNAL
MODE=ON
[±]
ON
OFF
“NEXT FAX”: This setting is
effective only for the next
attempted fax transmission. After
transmission, the unit will return to
the previous setting.
“ERROR”: When the previous fax
transmission fails and you redial
the same number.
● This feature is not available for
broadcast transmission.
● The calling charge may be higher.
#23
Sending document overseas
If you have difficulty sending an
overseas fax, activate this feature
before starting transmission. This
feature makes sending documents
easier by reducing the transmission
speed.
OVERSEAS MODE
MODE=ERROR
[±]
Feature & Display Settings How the unit operates
#25
Sending a fax at a specific time
This feature allows you to take
advantage of low-cost calling
hours offered by your telephone
company.
● The setting can be reserved to
take place up to 24 hours in
advance.
DELAYED SEND
MODE=OFF
[±]
NEXT FAX
ERROR
OFF
ON /
fax no. /
hh:mm
OFF
(The default setting is in bold type.)
Advanced features !
“ON”: The unit will print a journal
report automatically after every 30
new fax communications (p. 32).
Note:
● Step 3 may be slightly different depending on the
feature.
● See page 60 for more details.
1. Press p.
2. Press ( or ) until the following is
displayed:
then press w and press ( or )
until the desired feature is displayed.
ADVANCED MODE
PRESS SET
3. Press + or - until the desired setting is
displayed.
4. Press w.
5. Press p.
KX-FLB756 (060-065) 03.4.14 9:16 PM Page 63