Pausing cd playback 17, Using compression and bmx 17, Selecting the search method 17 – Playtex Multi-CD control High power CD/MP3/WMA/WAV player with FM/AM tuner DEH-P560MP User Manual

Page 17: Pausing cd playback, Using compression and bmx, Selecting the search method, Built-in cd player

Advertising
background image

1 Press FUNCTION to select SCAN.

Press FUNCTION until SCAN appears in the

display.

2 Press a to turn scan play on.

SCAN :ON appears in the display. The first 10

seconds of each track is played.

3 When you find the desired track press

b to turn scan play off.

SCAN :OFF appears in the display. The track

will continue to play.

# If the display has automatically returned to
the playback display, select SCAN again by press-
ing FUNCTION.

Note

After scanning of a CD is finished, normal play-
back of the tracks will begin again.

Pausing CD playback

Pause lets you temporarily stop playback of

the CD.

1 Press FUNCTION to select PAUSE.

Press FUNCTION until PAUSE appears in the

display.

2 Press a to turn pause on.

PAUSE:ON appears in the display. Play of the

current track pauses.

3 Press b to turn pause off.

PAUSE:OFF appears in the display. Play will re-

sume at the same point that you turned pause

on.

Using compression and BMX

Using the COMP (compression) and BMX

functions let you adjust the sound playback

quality of the CD player. Each of the functions

have a two-step adjustment. The COMP func-

tion balances the output of louder and softer

sounds at higher volumes. BMX controls

sound reverberations to give playback a fuller

sound. Listen to each of the effects as you se-

lect through them and use the one that best

enhances the playback of the track or CD that

you are listening to.

1 Press FUNCTION to select COMP.

Press FUNCTION until COMP appears in the

display.

2 Press a or b to select your favorite set-

ting.

Press a or b repeatedly to switch between the

following settings:

COMP OFFCOMP 1COMP 2

COMP OFFBMX 1BMX 2

Selecting the search method

You can switch the search method between

fast forward/reverse and searching every 10

track.

1 Press FUNCTION to select FF/REV.

Press FUNCTION until FF/REV appears in the

display.

# If the search method ROUGH has been pre-
viously selected, ROUGH will be displayed.

2 Press c or d to select the search meth-

od.

Press c or d until the desired search method

appears in the display.

! FF/REV  Fast forward and reverse
! ROUGH  Searching every 10 track

Built-in CD Player

En

17

English

Section

05

Advertising