Selecting treble frequency 37, Adjusting loudness 37, Using subwoofer output 37 – Playtex Multi-CD control High power CD/MP3/WMA/WAV player with FM/AM tuner DEH-P560MP User Manual

Page 37: Adjusting subwoofer settings 37, Adjusting loudness, Using subwoofer output, Audio adjustments, Selecting treble frequency, Adjusting subwoofer settings

Advertising
background image

Selecting treble frequency

You can select the treble frequency for level

adjustment.

1 Press AUDIO and hold until frequency

and the Q factor (e.g., F- 80:Q1W) appears

in the display.

2 Press AUDIO to select T.

Press AUDIO until T appears in the display.

3 Press c or d to select the desired fre-

quency.

Press c or d until the desired frequency ap-

pears in the display.

2k4k6k10k (Hz)

Adjusting loudness

Loudness compensates for deficiencies in the

low- and high-sound ranges at low volume.

1 Press AUDIO to select LOUD.

Press AUDIO until LOUD appears in the dis-

play.

2 Press a to turn loudness on.

Loudness level (e.g., LOUD :MID) appears in

the display.

3 Press c or d to select a desired level.

Each press of c or d selects level in the fol-

lowing order:

LOW (low)MID (mid)HI (high)

4 Press b to turn loudness off.

LOUD :OFF appears in the display.

Using subwoofer output

This unit is equipped with a subwoofer output

which can be turned on or off.

1 Press AUDIO to select SUB, W.

Press AUDIO until SUB, W appears in the dis-

play.

# When the subwoofer controller setting is
P/O :FUL, you cannot select SUB, W.

2 Press a to turn subwoofer output on.

SUB, W:NOR appears in the display. Subwoo-

fer output is now on.

# If the subwoofer output phase has been set to
the reverse, SUB, W:REV will be displayed.
# To turn subwoofer output off, press b.

3 Press c or d to select the phase of sub-

woofer output.

Press c to select reverse phase and REV ap-

pears in the display. Press d to select normal

phase and NOR appears in the display.

Adjusting subwoofer settings

When the subwoofer output is on, you can ad-

just the cut-off frequency and the output level

of the subwoofer.

1 Press AUDIO to select 80: 0.

Press AUDIO until 80: 0 appears in the dis-

play.

# When the subwoofer output is on, you can se-
lect 80: 0.
# If the subwoofer setting has been previously
adjusted, the frequency of that previously se-
lected will be displayed instead of 80.

2 Press c or d to select cut-off frequency.

Each press of c or d selects cut-off frequen-

cies in the following order:

5080125 (Hz)

Only frequencies lower than those in the se-

lected range are output from the subwoofer.

Audio Adjustments

En

37

English

Section

08

Advertising