Panasonic SC-HT441W - Manual (Page 26)

RQ
T
8
7
7
9
26
Us
in
g the
AM
/F
M
Ra
dio
Using the AM/FM Radio
Up to 15 stations can be set in each band, FM and AM.
When a stereo FM broadcast is being received, “ST” lights in the
display.
∫ If noise is excessive
When “FM” is selected
Press and hold [—FM MODE] on the main unit to
display “MONO”.
Press and hold [—FM MODE] again to cancel the mode.
≥ The mode is also canceled when you change the frequency.
When “AM” is selected
Press [FUNCTIONS] on the remote control.
Each time you press the button: BP 2 ()BP 1
∫ Presetting the channel
Up to 15 stations can be set in each band, FM and AM.
1 While listening to the radio broadcast
Press [ENTER] §3 .
2 While the frequency and “PGM” are flashing on the display
Press the numbered buttons to select a channel.
≥ When selecting a 2-digit number
e.g. To select “12”, press [ S10] ➜ [1] ➜ [2].
Alternatively, press [ X, W], and then press [ENTER] §3 .
The station occupying a channel is erased if another station is
preset to that channel.
Presetting stations automatically
1 Press [TUNER/BAND] §1 to select “FM” or “AM”.
2 Press [ 6, 5] §2 to tune to the lowest frequency
(FM: 87.9 or 87.5, AM: 520).
≥ When performing this step on the main unit, first press
[-TUNE MODE] to select “MANUAL”, and then press [ X TUNING W]
to tune to the lowest frequency (FM: 87.9 or 87.5, AM: 520).
3 Press and hold [ENTER] §3 .
Release the button when “FM AUTO” or “AM AUTO” is displayed.
The tuner presets all the stations it can receive into the channels in
ascending order.
≥ “SET OK” is displayed when the stations are set, and the radio
tunes to the last preset station.
≥ “ERROR” is displayed when automatic presetting is unsuccessful.
Preset the channels manually ( ➜ right).
MEMORY SELECTOR
TUNING -TUNE MODE / -FM MODE
ENTER
FUNCTIONS
TUNER/BAND
,
Numbered
buttons
Radio operations are described mainly with the remote control.
You can alternatively use the corresponding button on the main unit.
§1 [SELECTOR] §2 [ X TUNING W] §3 [MEMORY]
Selecting the preset channels
1 Press [TUNER/BAND] §1 to select “FM” or “AM”.
2 Press the numbered buttons to select the channel.
≥ When selecting a 2-digit number
e.g. To select “12”, press [ S10] ➜ [1] ➜ [2].
Alternatively, press [ X, W] to select the channel.
≥ To perform this step on the main unit, first press [-TUNE MODE] to
select “PRESET”, and then press [ X TUNING W] to select the
channel.
Manual tuning
1 Press [TUNER/BAND] §1 to select “FM” or “AM”.
2 Press [ 6, 5] §2 to select the frequency.
≥ When performing this step on the main unit, first press
[-TUNE MODE] to select “MANUAL”, and then press [ X TUNING W]
to select the frequency.
≥ To start automatic tuning, press and hold [6, 5] §2 until the
frequency starts scrolling. Tuning stops when a station is found.
DISC SFC TG D.MIX MONO SLP ST CT
MODE
AC
PRG
RDS
DTS
PL
A PS PTY
H.BASS
2
SRD
PGM
HDCD
E.
1 RND
CD
DVD W
D
ST
MODE
AC
PRG
RDS
DTS
PL
A PS PTY
H.BASS
SRD
PGM
HDCD
E.
1
CD
DVD W
D
MONO ST
MODE
AC
PRG
RDS
DTS
PL
A PS PTY
H.BASS
SRD
PGM
HDCD
E.
1
CD
DVD W
D
DISC SFC TG D.MIX MONO SLP ST CT
MODE
AC
PRG
RDS
DTS
PL
A PS PTY
H.BASS
2
SRD
PGM
HDCD
E.
1 RND
CD
DVD W
D
HT441WEn.book Page 26 Friday, June 9, 2006 5:43 PM