PLUS Vision V-1100Z - Manual (Page 50)

E-50
Color System
This function sets the color system of the video signal.
Normally, this should be set to Auto. Set this function when
the system cannot be identified with Auto.
Select item name "Color System" and select the setting contents
with the cursor (
ᮤ ᮣ
) buttons.
Auto ............ Automatic identification
NTSC .......... Fixes the setting to NTSC
PAL ............. Fixes the setting to PAL
SECAM ....... Fixes the setting to SECAM
Gamma Normal
Quick Color Adj. Standard
High
Auto
White
Normal Color Temp.
Color System
Color
Color Space
Set this function when a component signal (YCbCr or YPbPr)
is projected and the image is extremely red or extremely
green.
Select the item name "Color Space" and use the cursor (
ᮤ ᮣ
)
buttons to select a color space setting that provides a normal im-
age.
Selection contents at the time of YCbCr input
YCbCr601, YCbCr709, YCbCrSMPT
Selection contents at the time of YPbPr input
YPbPr601, YPbPr709, YPbPrSMPT
Gamma Normal
Quick Color Adj. Standard
Normal
Auto
Color Temp.
Color System
High White
YCbCr601 Color Space
Gamma Normal
Quick Color Adj. Standard
High White
Normal Color Temp.
YPbPr601 Color Space
Note
* When the component signal undergoes conversion processing to red, green, and blue which express the image
of the projector, the correct color cannot be reproduced unless a system compliant with the color difference
conversion system of the input signal is used. Color Space serves to make this selection.
White
When projecting, this function is used to emphasize the
whites of text or diagrams on the personal computer.
Select item name “White” and select the setting contents with the
cursor (
ᮤ ᮣ
) buttons.
Select the desired degree of white from among “Low”, “Medium”,
and “High”.
Gamma Normal
Quick Color Adj. Custom
High White
Normal Color Temp.