Planet Technology SKD-200 - Manual (Page 10)

Before initial operation, YOU SHOULD FULLY
CHARGE THE HANDSET for 24 hours.
To charge the handset, just place it on the charger.
When charging, the handset is automatically turned
on and the battery icon on the display will blink.
2.2 DECT Screen Display
This area displays in-use information such as the caller's number, menus, call
duration, etc.
In standby mode, the display will show the signal strength icon, battery status
icon, handset and base number.
Signal strength icon:
This icon is always displayed when your phone is on,
and shows the current signal strength. More bars
indicate more signal strength.
Mute icon:
This icon indicates that the phone is in mute
conversation mode.
Lock icon:
This icon indicates that the key lock function is
activated.
Line icon:
The icon is displayed when the line is engaged. L1
means PSTN line is engaged. L2 means Skype VoIP
line is engaged. L3 means Intercom is engaged.
In use icon:
This icon indicates that the phone is in use mode.
• Intercom icon
This icon indicates that the phone is in the intercom
conversation mode.
Speakerphone icon:
This icon indicates that the phone is in speakerphone
mode.
Operation icon
This icon indicates that the phone is in the operation
mode.
Caller ID icon
This icon indicates that there is a new call. To view the
call, access the Caller ID menu.
Hot call
This icon indicates that the hot call function is
activated.
Battery status icon
This icon is displayed at all times when your phone is on, and shows the level of your battery charge. The
more bars, the greater the charge. During charging, the icon will flash.
10