Chapter 2 hardware installation, 1 system requirement, 2 hardware installation – Planet Technology VC-200S User Manual

Page 10

Advertising
background image

PHONE

The RJ-11 connector allows voice communication between the router

and phone through a twisted-pair phone wire.

VDSL2

The RJ-11 connector allows data communication between the router and

the VDSL2 network through a twisted-pair phone wire

Chapter 2 Hardware Installation

This chapter offers information about installing your router. If you are not familiar with

the hardware or software parameters presented here, please consult your service

provider for the values needed.

2.1 System Requirement

1. Personal computer (PC)

2. Pentium II 233 MHz processor minimum

3. 32 MB RAM minimum

4. 20 MB of free disk space minimum

2.2 Hardware Installation

This section describes how to connect and configure VC-200M/VC-200S.

To PC/Hub

To VDSL2/Phone Line

Power Adapter

Step 1. Connect the VDSL2 Line

There are two ways to connect VC-200M or VC-2000S.

I.

Connect the supplied RJ11 cable to VDSL2 ports between VC-200M and

10

Advertising
This manual is related to the following products: