Planet Technology VC-200S - Manual (Page 29)

Note: By factory default: Device Mode is Bridge Mode.
3.5.3.5 Firmware Upgrade
To update the system firmware, click on the Firmware Upgrade link in the left
navigation bar, show as below.
z Click “Browse” to select a specified file name to change the file Name.
z Click “APPLY” to start the firmware update.
3.5.3.6 System Status
To view system status, click on the System Status link in the left navigation bar,
show as below.
This screen displays the status of certain important system parameters. It also offers
control over the current DHCP lease for the IP Address.
29