Panasonic EB-X70 - Manual (Page 30)

30
Voice calls
Voice calls
 Press the main function button on the EB-BHX70 headset, or the green call button
on most car kits.
 The display reads Voice Call Bluetooth.
Alternatively, you can select Menu > Bluetooth. The display reads Transferring Audio
to Bluetooth, then changes to Bluetooth Audio Transfer Complete.
Transferring a call from Bluetooth ® headset or car kit to handset
If you are making a call using your headset or car kit, you can transfer the call to your
handset.
 On the handset, select Menu.
 Select H’held.
Using automatic redial
If a connection is unsuccessful, press Q when Ok is displayed.
To stop redialing, press Q when Cancel or C is displayed.
Using hotkey dialing
If you have set up hotkey dialing, you can press and hold a digit key to display an assigned
contact. Press
D to dial the number.
As each entry is stored in your Contacts List a numbered location is assigned, pressing
and holding the digit key relating to that number will display the Contact.
For digits “10 ” and above press
# after selecting the numbered location then D to
dial the number.
Displaying caller ID
If the caller’s number and name are stored in your Contacts List, they can be displayed
during an incoming call.
Note: If you transfer the call using the Menu, then the call is transferred to the default
audio device. See Selecting default audio device on page 123 for information
about selecting your default audio device.
Note: The following Keys may be preset by your service provider and can not be
changed.
1 : “Voice mail” number
9
: Games
Note: This is network dependent R.
Note: Caller ID may not always be available.
X70_US_Text.fm Page 30 Tuesday, March 9, 2004 1:21 PM