Panasonic EB-X70 - Manual (Page 51)

51
Settings
Settings
Setting a warning level
You can set a warning to indicate that you have almost reached your maximum cost.
 Select Service Charges > Warning at.
 Enter a value in units at which you want the warning to sound.
Viewing the remaining cost
You can see how many units you have left before you reach your maximum cost level.
 Select Service Charges > Cost Left.
Viewing the used cost
You can see how many units you have used.
 Select Service Charges > Call Meter.
Resetting the used cost
Use this to reset your used cost.
 Select Service Charges > Call Meter.
 Select Reset.
 Confirm that you want to reset this setting.
 Enter your PIN2.
Sending your number
If your network supports this function, you can decide whether you want your phone
number to be sent when you make a call.
 Select Send My Number.
 Select from Network Set, On and Off.
If you select Network Set, your network’s default setting is used.
Note: This is SIM dependent M.
Note: This is network dependent R.
Note: You must be registered with a service provider before you can choose to send your
number.
Me
nu
> Sett
ings >
S
ecurity
X70_US_Text.fm Page 51 Tuesday, March 9, 2004 1:21 PM