Panasonic KX-FP151 - Manual (Page 69)

How the unit operates
#67
Features Summary
69
1. Follow steps 1 and 2 above.
2. Press
+ or - to select “ON”.
3. Press w .
4. Enter the transfer telephone
number.
5. Press w .
6. Press p .
● This feature can be turned on/off
from a remote location (p. 55).
#60
■ For KX-FP155 only:
Setting the message transfer
To transfer a recorded incoming
message to another telephone
(p. 60).
MESSAGE TRANS.
=OFF
[±]
ON
OFF
■ For KX-FP155 only:
Setting the incoming message
monitor
To hear an incoming message
(ICM) from the speaker when the
answering device is recording the
message.
ICM MONITOR
=ON
[±]
ON
OFF
If you select “OFF”, you cannot
monitor the incoming message.
#68
Setting the Error Correction
Mode (ECM)
To send a fax even if there is static
interference on the telephone line.
ECM SELECTION
=ON
[±]
ON
OFF
This feature is available when the
transmitting/receiving stations are
ECM compatible.
●
If received documents are in
memory, follow the display
message to solve the problem
and print out the documents in
memory before changing the
setting.
After the setting is changed, the
documents in the memory will be
erased.
Code Feature & Display Settings
(The default setting is in bold type.)
#61
■ For KX-FP155 only:
Transfer greeting message
(checking, recording or erasing)
TRNS-GREETING
CHECK
[±]
CHECK
RECORD
ERASE
See page 60 for details.
#58
Setting the original mode
To send or copy a document with
faint or dark writing, set this feature
before starting transmission or
copying.
ORIGINAL
=NORMAL
[±]
NORMAL
LIGHT
DARKER
“NORMAL”: Used for normal
writing.
“LIGHT”: Used for faint writing.
“DARKER”: Used for dark writing.
● This feature will return to the
normal mode after transmission
or copying.