Panasonic KX-FP151 - Manual (Page 70)

Features Summary
70
Advanced features (cont.) !
How to set menu options
Note:
● Step 3 may be slightly different depending on the
feature.
● See page 61 for more details.
1. Press p .
2. Press ( or ) until the following is
displayed:
then press w and press ( or )
until the desired feature is displayed.
ADVANCED MODE
PRESS SET
3. Press + or - until the desired setting is
displayed.
4. Press w .
5. Press p .
Programming table (cont.)
Code Feature & Display Settings How the unit operates
(The default setting is in bold type.)
See page 45 for details.
#70
#74
Calling your pager
Activate this feature if you have a
pager and wish to know when your
unit receives the following:
— KX-FP151: a fax document.
— KX-FP155: a fax document or an
incoming voice message.
PAGER CALL
=OFF
[±]
FAX PAGER CALL
=OFF
[±]
ON
OFF
You can confirm the status of the
other party’s machine.
● If the ring back tone continues, the
other party’s machine may not be
a facsimile or may have run out of
paper. Check with the other party.
● The connecting tone volume
cannot be adjusted.
#76
Setting the connecting tone
If you often have trouble when
sending a fax, this feature allows
you to hear connecting tones: fax
tone, ring back tone and busy tone.
CONNECTING TONE
=ON
[±]
ON
OFF
(KX-FP151)
(KX-FP155)
“AUSTRALIA”: To use in Australia
“NEW ZEALAND”: To use in New
Zealand Setting the location where you
use this unit
This setting must match your
location.
LOCATION
=AUSTRALIA
[±]
AUSTRALIA
NEW ZEALAND